3 Things You’ve Been Doing WRONG When Applying Magnetic Polish!

Wednesday is upon us again, so it’s blog time! This week I’m going to show you three mistakes that you’ve been making when applying magnetic nail polish, and how to fix them!

So magnetic polish has been around for a long time now, most nail polish addicts will have them. When I got my first magnetic polish, I was seriously underwhelmed with the effect. It looked great when I took the magnet away and a few minutes later, it looked like a gradient gone wrong… Sound familiar? Let me help.👇🏻

Mistake number one: You didn’t hold the magnet over the polish for long enough.

I know this sounds ridiculously obvious but bare with me. Most companies will tell you to hold the magnet for 15 to 20 seconds, the problem with that is when you pull the magnet away, the polish is still wet. As the polish dries, that magnetic line will soften. The trick is to keep the magnet over the wet polish for at least a minute. This way the polish will be mostly dry when you pull the magnet away. I count to 60 for each nail. Yes this may sound like a load of faffing but honestly, you won’t regret it. I did this trick for these nails.👇🏻

Mistake number two: You used the magnetic polish by itself.

Magnetic polishes are sheer, and usually thin in consistency. Most magnetic polishes take at least three coats to become fully opaque. This takes away a lot of the colour in the magnetic polish itself. The line won’t be quite as striking. Use a black base colour to layer the magnetic polish over. You will only need two coats. Plus, the shift in multichrome magnetic polishes will be much stronger and the line will be more defined. I used that technique in the mani above also.☝🏻

Finally, mistake number three: You put a top coat on expecting your magnetic mani to remain the same.

It most definitely will not. Allow me to explain, quick dry top coats in particular penetrate the layers of polish underneath the top coat. Thus, making them wet again. As I said before, the magnetic line will soften as the polish dries. To stop this from happening, hold the magnet over the wet top coat for 30 seconds, hold it for a minute if you’re not using a quick dry top coat. And hey presto! You’ve got a perfect magnetic manicure.

Go and try it! If you used these tips tag me (@annes.nails) on Instagram so I can see!

See you next week!

Anne. X

Advertisements